56
5
5
5
5 ) Brake
Brake
Brake
Brake fluid
fluid
fluid
fluid inspection
inspection
inspection
inspection
Inspect the oil level in the brake oil
reservoir, the oil level should be
between two graduation lines. When
filling the oil, avoid dust or water
coming into the oil reservoir.
Open
Open
Open
Open engine
engine
engine
engine hood
hood
hood
hood
Open the engine hood from the left side of
machine body.
6
6
6
6 ) Eletrolyte
Eletrolyte
Eletrolyte
Eletrolyte inspection
inspection
inspection
inspection of
of
of
of the
the
the
the battery
battery
battery
battery
There are upper and lower level graduation
lines on the battery. The operator can
observe the level and the level should be
between the two lines.
Hazards
Hazards
Hazards
Hazards
Do not keep open flame close to the filling
fluid of the battery, as the point will produce
hydrogen and result in explosion.
7
7
7
7 ) Coolant
Coolant
Coolant
Coolant level
level
level
level inspection
inspection
inspection
inspection
Inspect the level of refilling reservoir. The
level should be between the upper and lower
graduation lines, add the coolant as the
requirement.
Warning
Warning
Warning
Warning
Pay attention when open the pressure cover
of the water tank. Open the cover under
pressure,sudden pressure release will
produce stream flow, this will cause
personnel injuries. Encase the cover with
thin cloth or similar materials, release the
cover slowly and let the stream spill, then
screw down the cover. Do not wear gloves
to avoid the hot water spouted scalding the
hand.
8
8
8
8 ) Oil
Oil
Oil
Oil level
level
level
level inspection
inspection
inspection
inspection of
of
of
of engine
engine
engine
engine
Oil dipstick of the engine is on the left side
of machine body. Pull out the oil dip stick
and wipe up the head of dipstick. Then
insert the dipstick again and pull out it.
Inspect whether the oil level should be
between both two lines.
9
9
9
9 ) T
T
T
T ightness
ightness
ightness
ightness inspection
inspection
inspection
inspection of
of
of
of fan
fan
fan
fan belt
belt
belt
belt
inspect the tightness of fan belt and whether
the fan belt is damaged. Press the middle