Need help?Do you have a question about the LORCH ControlPro and is the answer not in the manual?
Instructions for proper connection of the ground cable for safe welding.
Guidance on safely connecting the machine to the mains power source.
Step-by-step guide for performing electrode welding, including setup and arc ignition.
Instructions for setting up and performing TIG welding, including arc ignition and upslope.
Detailed steps for electrode welding, including arc ignition and hotstart.
Detailed steps for TIG welding, including arc ignition and upslope parameters.
Instructions for proper connection of the ground cable for safe welding.
Guidance on safely connecting the machine to the mains power source.
Step-by-step guide for performing electrode welding, including setup and arc ignition.
Instructions for setting up and performing TIG welding, including arc ignition and upslope.
Detailed steps for electrode welding, including arc ignition and hotstart.
Detailed steps for TIG welding, including arc ignition and upslope parameters.
General| Control | Digital |
|---|---|
| Operating Voltage | 400 V |
| Protection Class | IP23 |
| Weight | 45 kg |
| Welding Processes | MIG/MAG, TIG |
| Rated Output Current | 350 A |
| Power Supply | Three-phase |
To Next Page