What to do if my Lorex D241 DVR is not receiving power?
If your Lorex DVR is not powering up, ensure all power adapter cables are correctly and securely connected, especially at the back of the unit. Also, confirm the system is powered on by checking the LED indicators. If connected through a power bar, try connecting directly to the wall outlet. Check the outlet's functionality by testing it with another device or using a different outlet.
Why is my Lorex DVR hard drive not detected?
If the hard drive in your Lorex DVR is not detected, the hard drive cables may be loose or not properly connected. Remove the housing and check that the hard drive cables are firmly connected. Alternatively, there may be no hard drive installed in the system. In that case, open the housing and install a compatible hard drive.
General safety advice and warnings for product usage.
Safety guidelines and considerations during product installation.
Guidelines for product servicing and conditions requiring professional attention.
Instructions and precautions for the safe and proper operation of the product.
How to adjust main and sub-stream video quality for storage and streaming.
Customizing when and how recordings are made based on time and events.
Options for setting up continuous or scheduled recording.
Configuring the system to overwrite old footage when storage is full.
Steps to search and play back recorded video stored on the system's hard drive.
Explanation of the controls used during video playback.
How to play back video files saved to an external USB drive.
Searching for recorded events within specific areas of a camera's view.
Procedure for creating and saving short video clips to a USB device.
Guide to preparing USB drives for data backup by formatting them.
Steps to save recorded video files onto a USB flash drive.
Detailed instructions for backing up specific video clips.
How to access and view previously backed-up video files.
How to define active areas within a camera's view for motion detection.
Setting up daily and weekly schedules for motion detection activation.
Configuring how the system responds to detected motion events.
Enabling and configuring smart detection for people and vehicles.
How to search for specific person/vehicle detection events.
Configuring automatic warning lights and sirens based on motion.
Methods for manually triggering deterrence features on cameras.
Procedures for modifying the administrator and user account passwords.
Steps to create new user accounts with specific permissions.
How to edit existing user account details and permissions.
To Next Page
General