Using the Main Menu14
4. Configure Daylight Savings Time (DST) settings:
• DST: Click to enable (
) / disable ( ) Daylight Savings Time.
• DST Type: Select Week to set the start and end time based on a day and week (e.g., 2nd
Sunday of March), or select Date to set the start and end time to a specific date.
• Start Time / End Time: Set start and end times for DST. Format will change depending
on your selection for DST Type.
5. Configure Network Time Protocol (NTP) settings:
NOTE
Your system must have a constant connection to the Internet to use NTP.
• NTP: Click to enable ( ) / disable ( ) Network Protocol Time.
• Server: (Advanced users only) Enter a custom NTP server.
• Port: (Advanced users only) Enter a custom NTP port.
• Interval: Select how often the system will sync time with the NTP server.
6. Click Apply.
14.7.3 Configuring Holidays
You can set certain days as holidays. Holidays have a special recording schedule.
NOTE
Ensure you adjust the holiday recording schedule to your preferences. See 8.3 Setting the Recording Schedule,
page 19 for details.
To configure holidays:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click SYSTEM. Click the GENERAL tab on the side panel, then Holiday on the top panel.
#LX400111; r. 2.0/56089/56100; en-US 66
To Next Page
Loading...
