Active Deterrence12
Lorex Active Deterrence cameras feature bright, customizable warning lights and remote-triggered
sirens. The recorder allows you to customize automatic light-triggering when motion is detected
to deter intruders (see 12.1 Automatic Deterrence Settings, page 40). You can also trigger the
lights and sirens manually using the recorder or Lorex connectivity software (see 12.2 Manually
Activate Deterrence Features, page 42).
For a complete list of compatible deterrence cameras, navigate to your recorder series at
lorex.com/compatibility.
12.1 Automatic Deterrence Settings
Set preferences for automatic warning light triggering on compatible Lorex deterrence cameras.
To configure deterrence settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click ALARM. Click the MOTION tab on the side panel, then Deterrence on the top panel.
3. Select the channel of a connected deterrence camera.
4. Check Enable.
#LX400111; r. 2.0/56089/56100; en-US 40
To Next Page
Loading...
Need help?
General