a
c
d
b
e
17
Face detection
To congure face detection settings:
1. From the camera’s live view, right-click and then click Main Menu.
2. Enter the system user name (default: admin) and password.
3. Click EVENTS > Face Settings > Face Detection.
4. Congure the following:
a. Select a connected camera. Face
detection is
only available up to 2
channels.
b. Check Enable. Smart motion
detection has to be disabled on
all channels.
c. Click Setup > Schedule to set the
weekly schedule.
d. Set preferences for how the
system reacts to a detected face.
e. Click Apply to save.
ATTENTION: Facial recording without consent is illegal in certain jurisdictions. Lorex Technology
does not assume liability for any use of its product that fails to conform with local laws.
To Next Page
Loading...
Need help?
General