1. All the warnings and instructions of this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use
water damped cloth for cleaning
3. Do not use this unit in very humid and wet places
4. Keep enough space around the unit for ventilation. Slots and openings of the cabinet should
not be blocked.
5. During flashes of lightning or cracks of thunder, or when the system is not used for a long time,
unplug the system power supply and disconnect the antenna and cables to protect the unit
from lightening or power surges.
Monitor Features:
• Built-in integrated IP Server for Internet Monitoring (software included)
• View up to 8 camera locations in real time
• Metal cabinet with 8 camera inputs (8 DIN / 8 BNC and 8 audio RCA)
• 2 way audio
• Single or Dual PIP viewing options – main and PIP channels
• Selectable POP viewing options
• Selectable still frame in quad or full screen
• Two times zoom
• Motion Sensing Alarm Function
• Video loss detection warning (only on active page shown on screen)
• On screen viewing: date*time*camera
• Remote control or main panel operation
• ON/OFF standby switch enables monitor screen to be turned off while recording
• Multi-voltage system 100 – 240Volts
Standard Camera Features
• 1/4” CCD Color Camera with night vision
• Built in speaker and microphone to allow for two way audio communication
• Metal mounting bracket
CAUTIONS:
-3-
FEATURES:
To Next Page
Loading...
Need help?
General
