Smart Motion Detection14
6. Click Set next to Area to set active areas for person and/or vehicle detection.
• Click Add to set an area for person or vehicle detection on the selected channel. Click-and-
drag the corners to resize the area.
• For most accurate results, set an area where objects of interest will move within the bound-
ing box as well as into / out of.
• Check Light next to a rule to flash the camera’s warning light when an object is detected.
• See 14.1 Ensuring Accurate Person & Vehicle Detection, page 48 for optimal camera posi-
tioning for person and vehicle detection.
7. Click Set next to Schedule to set a weekly schedule for person and/or vehicle detection.
• Click or click-and-drag along each of the yellow timelines to quickly add or remove time
from each day’s schedule in 15–minute segments.
• Click
beside 2 or more days to link schedules ( ). This allows you to quickly
change multiple schedules at once.
• To make fine adjustments to a schedule, click Set. This will allow you to set exact start and
end times for a schedule.
• Click OK when finished.
#LX400113; r. 2.0/56306/56316; en-US 50
To Next Page
Loading...
Need help?
General
