Loyal Hands Watch - To Reset Stopwatch Hands; Accumulated Elapsed Time Measurement

To reset stopwatch hands:
1. PULL crown to position C.
2. PRESS pusher A intermittently until the seconds sweep hand is reset to 12.
3. PRESS pusher B intermittently until the bottom and top eye is reset to 0.
NOTE: PRESSING and HOLDING either pusher A or B will cause the hands to continue to move
until the pusher is released.
Standard stopwatch measurement:
4. PRESS pusher A to start timing.
5. PRESS pusher A to stop timing.
6. PRESS pusher B to reset.
Accumulated elapsed time measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher A to restart timing.
4. PRESS pusher A to stop 2
nd
timing.
5. PRESS pusher B to reset.
Split time:
PRESS pusher A to start timing.
PRESS pusher B to split.
PRESS pusher B to begin again.
PRESS pusher A to stop.
PRESS pusher B to reset.
12