EasyManua.ls Logo

Loyal Hands Watch - Alarm Operation; Dual Time Setting Mode (DT)

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
Alarm Operation:
The Alarm tone will sound for 10 seconds when the preset alarm time is reached, press C or D
keys to stop the alarm tone. The Alarm tone will repeat sounding after 5 minutes when the
snooze indicator is ON, the snooze function will keep continuous sounding 6 intervals with 10
seconds tone sound and then it will auto stop sounding. Or press B key return to Alarm mode
and press C key to turn OFF the Snooze indicator and function.
Dual Time Setting Mode (DT)
At Normal Time mode, press B key 2 times enter to Dual Time mode
Press D key to enter Dual Time setting, the Hour digit will flash, press C key to adjust the Hour
digits; press D key to set Minute digit to flash, press C key to adjust the Minute digits.
Press D key to confirm setting, press B key return to Normal Time mode
Chronograph Mode
At Normal Time mode, press B key 3 times to enter Chronograph mode.
The display range of Chronographs is 23 hours, 59 minutes, 59.99 seconds.
Chronograph start counting base on 1/100 second.
When the Chronograph count reaches maximum counting values, it will restart counting again.
Press C key to stop the Chronograph.
‘SPL’ is displayed in Chronograph mode when split time is counting.
When Chronograph is running, press B key to exit and return to Normal Time mode, the
Chronograph counting operation will continue even if you exit Chronograph.

Table of Contents