Loyal Hands Watch - Calendar;Stopwatch

CALENDAR
To set the calendar:
1. PULL out crown to 2 position.
2. TURN crown clockwise to correct date.
3. PUSH in crown to 1 position.
NOTE: The date changes automatically every 24 hours.
STOPWATCH
The stopwatch is capable of measuring:
1/20 seconds elapsed up to one second (bottom eye).
Minutes elapsed up to 30 minutes (top eye).
Hour elapsed up to 6 hours (top eye).
Seconds elapsed up to one minute (middle eye).
BEFORE USING THE STOPWATCH, reset the stopwatch hands (only the 60 and O position.
To reset stopwatch hands:
1. PULL crown to 3 position.
2. PRESS pusher A to reset the stopwatch hour/minute hand.
3. PRESS pusher B to reset the stopwatch second hand.
4. PRESS pusher C to reset the stopwatch 1/20 second hand
5. PRESS crown back into 1 position
NOTE: PRESSING and HOLDING either pusher A, B or C will cause the hands to continue to
move until the pusher is released.
Standard stopwatch measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset.
14