Loyal Hands Watch - To Measure Time with Chronograph; Elapsed Time; Normal Time Setting Mode

34
To measure time with Chronograph:
Elapsed Time:
PRESS:
C Key C Key C Key C Key C Key
Start Stop Re-start Stop Clear
SPLIT TIME:
C Key D Key D Key C Key D Key
Start Split SPL Split Release Stop Clear
Display
TWO FINISHES:
C Key D Key C Key D Key D Key
Start Split First Stop Second Split Release & Clear
Runner Finishes Runner Finishes Display Time of
Display Time of Second Runner
First Runner
Normal Time Setting Mode
At Normal Time mode, press B key 4 times enter to Time setting.
Press D key to display the flash setting items as below:
Second “Hour “Minute “Year “Month “ Day “Second “
At the Time Setting mode, the second digit will flash, press C key
to set the second to ‘00’. When set the second to ‘00’ in the range
of 30 to 59 seconds, it will add 1 to the minutes, when set second
to ‘00’ in the range of 00 to 29seconds, the minutes are unchanged.
Press D key Hour digit will flash, Press C key to set the Hour.
Press D key Minute digit will flash, press C key to set the minute.
Press D key Year digit will flash, press C key to set the Year.
Press D key Month digit will flash, press C key to set the Month.
Press D key Day digit will flash, press C key to set the Day.
Press B key to confirm setting and return to Normal time mode.