7. Timer Mode
• Enter into the Timer mode, press D key to start/stop the timer running.
• Press C key to reload the preset value if the timer is not running.
• If timer is not running press and hold A key for 2 seconds will enter into the Timer Setting
Mode.
a. Entering into the setting mode, timer second will be set and blinking.
b. Press B key to cycle the setting sequence between the timers second, minute and hour.
c. Press C key or D key to increase or decrease the setting value. If C key or D key has
been pressed and hold for 2 seconds, auto advance function will be activated.
d. Press A key to exit the setting mode directly. Upon exiting the setting mode, the setting
value will be saved as the preset timer value.
• Timer alarm will be alerted for 30 seconds if timer is counted down to zero. Press any key to
stop the timer alarm.
• If there is no key operation for 60 seconds, the setting mode will be exited and returned to
Timer Display Mode.
42
To Next Page
Loading...