Loyal Hands Watch - Stopwatch - to Adjust Hands; To Set Stopwatch; Time Mode; To Measure Elapsed or Split Time

TIME
To set time:
1. PULL out crown to B position.
2. TURN crown either way to correct time.
3. PUSH crown to A position.
NOTE: If eye indicating 24 hours needs adjustment, advance watch hands by 12 hours.
STOPWATCH:
The stopwatch can measure up to 1 hour in minutes and seconds. Before using the stopwatch
ensure that stopwatch hands are at the 60 or 12 o’clock position.
To adjust hands:
1. PULL out crown to B position.
2. PRESS pusher A or B to adjust hands.
3. PUSH crown to A position
To set stopwatch:
PRESS pusher A to start timing.
PRESS pusher A to stop timing.
PRESS pusher B to reset stopwatch to 60.
To measure elapsed or split time:
1. PRESS pusher A to start timing.
2. PRESS pusher B to stop timing. The stopwatch continues to count seconds elapsed but the
hands do not move.
3. PRESS pusher B again to resume timing.
The hands move quickly to indicate elapsed time and continue counting.
NOTE: The hour, minute and second hands on the watch will continue to indicate the correct time
while using the stopwatch.
7