DAY / DATE / 24 HOUR
To set time:
1. PULL out crown to C position.
2. TURN crown either way to correct time.
3. PUSH in crown to A position
To set date:
NOTE: the date changes automatically every 24 hours.
1. PULL out crown to B position.
2. TURN crown clockwise to correct date.
3. PUSH in crown to A position.
To set day:
1. PULL out crown to C position.
2. Advance time 24 hours to change the day.
3. PUSH in crown to A position.
NOTE: 24 hour indicator can change only when
setting the time.
THE THREE-EYE CHRONOGRAPH (STOPWATCH)
This chronograph watch has 2 functions:
TIME, STOPWATCH
The left eye (stopwatch hand) measures minutes
elapsed on stopwatch, up to a maximum of 60 minutes.
The centre eye (stopwatch hand) measures seconds
elapsed on stopwatch, up to a maximum of 60 seconds.
It also shows measurement of elapsed time.
The right eye (24 hour hand) indicates time on a
24-hour basis.
6
To Next Page
Loading...