To reset stopwatch hands:
1. PRESS pusher A and B.
2. PRESS pusher B intermittently until the left eye hand is reset to 0
3. PRESS pusher A intermittently until the chronograph hand reset to 60
4. PRESS pusher A and B.
NOTE: PRESSING and HOLDING either pusher A or B will cause the hands to continue to move
until the pusher is released.
Standard stopwatch measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset.
Accumulated elapsed time measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher A to restart timing.
4. PRESS pusher A to stop 2nd timing.
5. PRESS pusher B to reset.
Split time measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher B to split.
3. PRESS pusher B to begin again.
4. PRESS pusher A to stop.
5. PRESS pusher B to reset.
20
To Next Page