Contact with overhead power lines can cause severe
electrical burn or death from electrocution.
Make sure there is enough clearance between raised
equipment and overhead power lines.
Add recommended rear tire liquid weight or rear
wheel weights for increased stability.
A backhoe attachment should be transported in a
low position at slow ground speeds. Make turns
slowly and use the tractor brakes cautiously.
A loaded attachment in the raised position alters the
center of gravity location of the machine and
increases the possibility of mishaps.
Make sure all parked backhoe on stands are on a
hard level surface with all safety devices
engaged to prevent backhoe from falling and being
damaged or injuring someone.
When using a backhoe, be alert of bucket, boom
and arm position always.
To Next Page
Loading...