Set a communication setting speed up to 115,200 bps.
Set a communication configuration. Set the data length, parity check
method, and the number of stop bits.
8-bit data / no parity check / 1 stop bit
8-bit data / no parity check / 2 stop bit
8-bit data / even parity / 1 stop bit
8-bit data / odd parity / 1 stop bit
Set the response time for the slave (inverter) to react to the request
from the master. Response time is used in a system where the slave
device response is too fast for the master device to process. Set this
code to an appropriate value for smooth master-slave communication.
To Next Page
Loading...