LSIS Starvert iG5A Series User Manual

1) It is indicated when choosing I17~I24 as a 12 (2nd motor select).
2) H91,H92 parameters are displayed when Remote option is installed.
2)
LED
display
Address for
communication
Parameter
name
Min/Max
range
Description
Adj.
during run
Factory
defaults
Function group 2
This parameter actives when the selected terminal is ON after
I17-I24 is set to 12 {2
nd
motor select}.
Copy the parameters from drive and save them into remote
loader.
Copy the parameters from remote loader and save them into
drive.
This parameter is used to initialize parameters back to the
factory default value.
0 -
1
All parameter groups are initialized to factory default
value.
2 Only Drive group is initialized.
3 Only Function group 1 is initialized.
4 Only Function group 2 is initialized.
5 Only I/O group is initialized.
Password for H95-[Parameter lock].
Set as Hexa value.
This parameter is able to lock or unlock parameters by typing
password registered in H94.
UL (Unlock) Parameter change enable
L (Lock) Parameter change disable
5.0 O
10.0 O
60.00 X
0 X
5 X
5 X
150 X
150 O
100 O
26.3 X
0 X
0 X
0 X
0 O
0 O
H81
H82
H83
H84
H85
H86
H87
H88
H89
H90
H91
H92
H93
H94
H95
A351
[2
nd
motor
Accel time] 0 ~ 6000
A352
[2
nd
motor [sec]
Decel time]
A353
[2
nd
motor 30 ~ 400
base frequency] [Hz]
A354
[2
nd
motor
0 ~ 2
V/F pattern]
A355
[2
nd
motor forward
torque boost] 0 ~ 15
A356
[2
nd
motor reverse [%]
torque boost]
A347
[2
nd
motor stall 30~150
prevention level] [%]
[2
nd
motor
50~200
A358 Electronic thermal
[%]
level for 1 min]
[2
nd
motor
A359
Electronic 50~150
thermal level for [%]
continuous]
A35A
[2
nd
motor 0.1~100
rated current] [A]
A35B [Parameter read] 0 ~ 1
A35C [Parameter write] 0 ~ 1
A35D
[Parameter
0 ~ 5
initialize]
A35E
[Password
0 ~ FFFF
register]
A35F [Parameter lock] 0 ~ FFFF
1)
35
Compact & Powerful Drive iG5A
Drive Starvert iG5A Series

LSIS Starvert iG5A Series Specifications

General

Brand	LSIS
Model	Starvert iG5A Series
Category	DC Drives
Language	English