7
Introduction
Lubecore™ Automated Lubrication Systems take care of daily regular and preventive
maintenance for components requiring lubrication.
An automated lubrication system prevents unnecessary wear and downtime, thus reducing
operating costs and preventing unforeseen expenses.
Automated lubrication systems not only assist with extending maintenance intervals, they also
prolong the useful technical and economic life of the equipment thus providing a higher residual
value.
Lubecore automated lubrication systems are environmentally friendly; they are suitable for
biodegradable lubricants, and prevent manual over-lubrication, and grease waste. The reduced
need for replacement components also has a positive impact on the environment reducing the
need for raw materials and energy to produce these replacement components.
The most important advantages:
• Extension of maintenance intervals.
• Reduced wear on components.
• Lower repair and replacement costs.
• Prevents downtime.
• More effective use of lubricant.
• Less time spent by technicians servicing equipment.
• Less expensive lubricant required, as expensive additives can be avoided.
• Reduces strain on equipment and operator.
• Improved fifth wheel performance; avoid trailer-steer and improves safety.
• Promotes the use of a single type of lubricant. Preventing compatibility problems and the
accidental application of the incorrect type of grease.
A Lubecore automated lubrication system ensures that all connected lubrication points on a
vehicle or equipment are lubricated with a predetermined amount of grease at the correct
interval. As lubrication takes place while the vehicle is in use, the lubricant is dispensed to all
the connected lubrication points during movement of those components that are connected,
ensuring an improved distribution of the lubricant over the surface area.
Apart from refilling the grease reservoir and performing a periodic quick system inspection, the
Lubecore automated lubrication system does not require anything else to get the job done.
Lubecore’s automated lubrication systems are designed with the utmost care and tested
rigorously. This ensures an extended operational life and trouble-free operation, even under
extreme operating conditions.
High Lubecore installation standards along with the use of the correct type of grease and
periodic inspections ensures years of trouble-free system operation. Periodic inspections, which
To Next Page
Loading...