Lucent Technologies Enhanced VR Series Batteries
Issue 5 December 1998 Installation and Maintenance Record 10 - 1
10 Installation and Maintenance
Record
The form in this section should be reproduced and used as the
Installation and Maintenance Record for batteries.
The battery installer should follow the instructions in Section 6,
“Unpacking and Handling” and “Installation Records,” to begin
the recordkeeping. The installer should then turn these
records over to the Maintenance organization, who becomes
responsible for taking the measurements detailed in this
section and for maintaining the form. If a warranty claim is
made, the Maintenance organization will be required to show the
“Installation and Maintenance Record” to support the claim.
Refer to Section 8,
Maintenance
, for required actions and
measurements.
Note
Failure to adhere to the maintenance schedules and
routines described in the
Maintenance
section of this
product manual will void the product warranty and may
result in reduced performance of your batteries.
To Next Page
Loading...
Need help?
General
