WEIVER 2.0 Manual
Weiver 2.0
/ Operations Manual
135
D-1. Unable to Detect Weiver 2.0 Device
Update the CMOS through USB memory booting. Please follow next steps.
D-2. Unable to nd contents of D: \ after completing the booting process
Please check the SSD drive. Visit http://www.samsung.com/sec/support/model/MZ-7PD128B/KR-downloads
and download Magician Software ver. 4.0.
Please run ‘SSD rmware checks’ (Backup required) or ‘Performance Optimization’ to optimize the SSD.
* Step by step Guide for Wiever 2.0 Mainboard Bios update
1. Making a Booting USB for DOS and Install Program
2. Insert a (blank) USB on PC and run installed the program.
D. Troubleshooting Guide
To Next Page
Loading...
Need help?
General