Lumantek WEIVER 2.0 User Manual

WEIVER 2.0 Manual
Weiver 2.0
/ Operations Manual
95
There are three ways to control the Weiver
1. Using the buttons at the front panel (WEIVER Player only)
2. Using an operating software, the WeiverEx
3. Using API
The rst and second method is supported all previous versions of the WEIVER software, however, the
third method can be supported from the WeiverPlayer1.0 software version 2.1.2.0. / WEIVER player 2.0
SW 2.2.0.0 / WEIVER 1.0/2.0 SW 2.2.1.1 Hence, if previous version is installed in the WeiverPlayer, API
function is not able to use.
The WeiverEx software connects the Weiver software as IP and send UDP packets to run the WEIVER.
We have opened the Weiver API example program and packet information because the purpose of
the WEIVER API is to control the WEIVER without the WeiverEx software. You can download reference
sources at Lumantek website. ( http://www.lumantek.com/support/download.html )
5.1 / Description
5.2 / WEIVER API Performance property
5. WEIVER API / INTRODUTION
[ WEIVER 2.0 Player ] [ WEIVER Player Software ]

Lumantek WEIVER 2.0 Specifications

General

Brand	Lumantek
Model	WEIVER 2.0
Category	Measuring Instruments
Language	English