Lumantek WEIVER 2.0 User Manual

WEIVER 2.0 Manual
Weiver 2.0
/ Operations Manual
3
For your protection, please read these safety instructions
completely before operating the equipment and keep this
manual for future reference. The information in this summary
is intended for operators. Carefully observe all warnings,
precautions and instructions both on the apparatus and in the
operating instructions.
Equipment Markings
The lighting ash symbol within an equilateral triangle is
intended to alert the user to the presence of un insulated
“dangerous voltages” within the product’s enclosure that may
be of sucient magnitude to constitute a risk of electrical
shock. The exclamation mark within an equilateral triangle
is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions within
literature accompanying the equipment.
Warnings
Water and Moisture :
Do not operate the equipment under or near water - for
example near a bathtub, kitchen sink, or laundry tub, in a
wet basement, near a swimming poor or in areas with high
humidity. Cleaning - Unplug the apparatus from the wall outlet
before cleaning or polishing. Do not use liquid cleaners or
aerosol cleaners. Use a lint-free cloth lightly moistened with
water for cleaning the exterior of the apparatus.
Ventilation :
Do not block any of the ventilation openings of the apparatus.
Install in accordance with the installation instructions. Never
cover the slots and openings with a cloth or other material.
Never install the apparatus near heat sources such as radiator,
heat registers, stoves, or other apparatus (including ampliers)
that produce heat.Grounding or Polarization - Do not defeat
the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other.
A grounding type plus has two blades and a third grounding
OPERATOR SAFETY SUMMARY
prong.
The wide blade or third prong is provided for your safety. If
the provided plug does not t into your outlet, consult an
electrician. Power-Cord Protection - Route the power cord so as
to avoid it being walked on or pinched by items placed upon or
against it, paying particular attention to the plugs, receptacles,
at the point where the cord exits form the apparatus.
Attachments :
Only use attachments as recommended by the manufacture.
Accessories :
Use only with a cart, stand, tripod, bracket, or table specied by
the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Lighting :
Unplug this apparatus during lightning storms or when unused
for long periods of time.
ISDN cables :
CAUTION - to reduce the risk of re, use only No. 26 AWG or
larger telecommunication line cord.
Servicing :
Do not attempt to service the apparatus yourself as opening
or removing covers may expose you to dangerous voltages or
other hazards, and will void the warranty. Refer all servicing to
qualied service personnel.
Damaged Equipment :
Unplug the apparatus from the outlet and refer servicing to
qualied personnel under the following conditions - When the
power cord or plug is damaged or frayed If liquid has been
spilled or objects have fallen into the apparatus If the apparatus
has been exposed to rain or moisture If the apparatus has

Lumantek WEIVER 2.0 Specifications

General

Brand	Lumantek
Model	WEIVER 2.0
Category	Measuring Instruments
Language	English