WEIVER 2.0 Manual
Weiver 2.0
/ Operations Manual
2
TRADEMARKS & COPYRIGHT
This document contains information that is proprietary to
LUMANTEK. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted, in any form, or by
any means, electronically, mechanically, by photocopying, or
otherwise, without the prior written permission of LUMANTEK.
Nationally and internationally recognized trademarks and
trade names are the property of their respective holders and
are hereby acknowledged.
Portions of this software are © 1996-2011 LUMANTEK Ltd. All
intellectual property rights in such portions of the Software
and documentation are owned by LUMANTEK and are
protected by United States copyright laws, other applicable
copyright laws and international treaty provisions. LUMANTEK
and its suppliers retain all rights not expressly granted.
Disclaimer
The information in this document is furnished for
informational purposes only, is subject to change without
prior notice, and should not be construed as a commitment
by LUMANTEK. The information in this document is believed
to be accurate and reliable; however LUMANTEK assumes
no responsibility or liability for any errors or inaccuracies that
may appear in this document, nor for any infringements of
patents or other rights of third parties resulting from its use.
No license is granted under any patents or patent rights of
LUMANTEK.
This document was written by the Technical Support
Department of LUMANTEK, Korea. We are committed to
maintaining a high level of quality in all our documentation.
Towards this eort, we welcome your comments and
suggestions regarding the content and structure of this
document. Please fax or mail your comments and suggestions
to the attention of:
LUMANTEK Attn: Product Support Department, A-11F, BYC
Highcity-A, 131 Gasan Digital 1 Rd., Gasan-dong, Gumchon-
Gu, Seoul, KOREA, +82 2 6947 7400, Fax: +82 2 6947 7440
Environmental Issues
Thank you for buying a product which contributes to
a reduction in pollution and thereby helps save the
environment.
Our products reduce the need for travel and transport and
thereby reduce pollution. Our products have either no or few
consumable parts (chemicals, toner, gas, paper). Our products
are low energy consuming products.
Waste handling:
There is need to send material back to LUMANTEK. Please
contact your local dealerfor information on recycling the
product by sending the main parts of the product for
disassembly at local electronic waste stations.
Production of products:
Our factories employ the most ecient environmental
methods for reducing waste and pollution by ensuring that
the products are recyclable.
To Next Page
Loading...
Need help?
General