Lumantek WEIVER 2.0 User Manual

WEIVER 2.0 Manual
Weiver 2.0
/ Operations Manual
65
3.9 / WeiverEX Program Introduction
When the WeiverEx program is initiated, the WEIVER unit is not yet connected. To proceed with connecting
the WEIVER, follow the following sequence:
Select Main Menu -> Control-> Connect the device and search WEIVER
To connect with WEIVER, a separate WEIVER IP List sub-window will appear.
There are various methods of connecting the WEIVER. For most of the methods during IP Search, the subnet
of the WEIVER unit and control PC must be matched to connect for security purposes properly.
Once the WEIVER has successfully connected another window
will display “Connected!”

Lumantek WEIVER 2.0 Specifications

General

Brand	Lumantek
Model	WEIVER 2.0
Category	Measuring Instruments
Language	English