Lumantek WEIVER 2.0 User Manual

WEIVER 2.0 Manual
Weiver 2.0
/ Operations Manual
26
This section is to show cross cable connection between PC and the Player by using static IP address. Please
note that the rst three columns of the static IP address for both PC and the player must be identical. To
control WEIVER Player 2.0 using xed IP, move to the WEIVER Player 2.0 network setting menu and set IP
address manually.
Now, the WeiverEX program can be initiated to access and monitor the WEIVER operations
3.7 / Cross Cable Connection Method( use GIgabit LAN port : see page17-no. )
Laptop and Desktop PC Conguration WEIVER Conguration

Lumantek WEIVER 2.0 Specifications

General

Brand	Lumantek
Model	WEIVER 2.0
Category	Measuring Instruments
Language	English