LumaSense technologies Innova Type 1314i User Manual

Instruction Manual
______________________________________________________________________
_____________________________________________________________________________
BE6043-16 Stand Alone Multipoint System LumaSense Technologies A/S
Page 20 of 25
1. Press S1.
Delayed Start
If you selected a delayed start, the following text is displayed:
Use the direction push-buttons to enter the desired date and start
time, e.g. 10 16:25. The following text is displayed.
When the monitoring task starts, the screen will change and
display the same messages as those displayed when a monitoring
task starts immediately.
Immediate Start
If you selected an immediate start, the following text appears on
the screen:
MEASUREMENT IN PROGRESS
RESULTS NOT YET AVAILABLE
START TIME : 1 00 : 00
PRESS ENTER TO CHANGE VALUE
ACTIVE TASK : MONITORING TASK NUMBER 1
TASK WILL START AT : 10 16 : 25 TIME 16 : 00

LumaSense technologies Innova Type 1314i Specifications

General

Brand	LumaSense technologies
Model	Innova Type 1314i
Category	Controller
Language	English