5.3. Functions of Buttons
- Acceptation button:
Þ entry in programming mode (hold down ca 3 seconds)
Þ moving through the menu – choice of level,
Þ entry in the mode changing the parameter value,
Þ acceptation of the changed parameter value,
Þ stop the measurement – when holding down the button, the result
is not updated. The measurement is still carried out.
- button increasing the value:
Þ display of maximal value, The pressure of the button causes the
display of the maximal value during ca 3 seconds.
Þ entry in the level of the parameter group,
Þ moving through the chosen level,
Þ change of the chosen parameter value – increasing the value.
- Button to change the digit:
Þ display of minimal value, The pressure of the button causes the
display of the maximal value during ca 3 seconds.
Þ entry in the level of parameter group,
Þ moving through the chosen level,
Þ change of chosen parameter value – shift on the next digit,
- resignation button:
Þ entry in the menu monitoring the meter parameters (by holding
down ca 3 seconds),
Þ exit from the menu monitoring meter parameters,
Þ resignation of the parameter change,
Þ absolute exit from the programming mode (by holding down
ca 3 seconds).
To Next Page
Loading...
Need help?
General
