Lumel N30U User Manual

41
The value placed In two successive 16-bit registers. These registers include the same data as 32-bit registers from the area 7500 The value is placed in 32-bit registers
Name
Write
(w)
/readout
(r)
Unit Name of the quantity
7000 7500 Identifier O —
Constant identifying the device.
The value 183 means the N30U meter
7002 7501 Status O —
Status is register describing the current
state of the meter
7004 7502 Control O %
It is a register defining the control of the
analog output
7006 7503 Minimum O —
Minimal value of the currently displayed
value
7008 7504 Maximum O —
Maximal value of the currently
displayed value
7010 7505
Displayed
value
O — Currently displayed value
7012 7506 Current time O — Current time
7014 7507
Wire
resistance
O
W
Password of analog-to-digital
transducer
7016 7508 ADC O —
S³owo przetwornika analogowo-cy-
frowego
7018 7509
Terminal
temperature
O
°C
Temperature of terminals – the mea-
surement is only carried out during the
temperature measurement by means of
thermoelectric sensors or during time
measurements
6.6. Registers Only for Readout
Table 11

Lumel N30U Specifications

General

Brand	Lumel
Model	N30U
Category	Measuring Instruments
Language	English