English -
9
Chapter 4 Instruction for Installation
4.1 Preparation before installation
Installation and connection of VC-A50S PTZ Video Camera requires
special skills. To install by yourself, please follow necessary steps, ensure
steady and tight installation of the device, and pay attention to your safety
to avoid any accident.
4.1.1 Ensure the safety of the installation environment. Please do
not install the device on unstable ceiling or in a place where
the device is in danger of falling to avoid any accident.
4.1.2 Please check whether accessories in the box are complete
or not. Please contact the supplier for any shortage, and
make sure to keep the accessories in the box intact.
4.1.3 Please choose a proper place for installation of VC-A50S in
advance. Please determine an installation place according
to the following requirements
4.1.1.1 Confirm the position for the object to be captured.
4.1.1.2 Confirm whether the VC-A50S is set at a proper distance
from other light sources.
4.2 Instruction for installation
4.2.1 I would like to install VC-A50S on the desk
4.2.1.1 Precautions for installation
Please install the machine on a flat desk
Do not grab the camera head by hand when handling the device
Do not rotate the camera head by hand. Improper rotation may
result in breakdown of the camera
To Next Page
Loading...
Need help?
General
