English -
29
AF speed
1. Normal
2. 1
3. 2
4. 3
5. 4
6. 5
Focus speed after AF
triggering
System
C-Video
NTSC LB
Image mode
NTSC CP
NTSC SQ
PAL LB
PAL CP
PAL SQ
Video Type
DVI/SDI
Select video output type
YPbPr
Prompt On / Off
Turn on/off the prompt
information on the display
Motionless
Preset
On / Off
When the function is enabled,
the screen will Freeze when
Preset is executed. Freeze
will be released after Preset is
completed
Low Latency
On / Off
Turn on to reduce image
delay
IR Receive On / Off
Turn on/off the infrared
reception
Language English / Chinese Language
Control Device Encoder / Controller Control Device setting
Protocol
Protocol V / Protocol
PD
Protocol V: VISCA
Protocol PD: PELCO D
PD Address 1~ C~255
The Protocol set to PD allows
the camera ID address to be
assigned
To Next Page
Loading...
