Pan/Tilt limit: Enable, and set the pan/tilt limit
Pan/Tilt flip: When it is set, the Pan/Tilt direction will go oppositely
Preset Speed: Set the rotation speed of the cradle head when Preset is
executed
PTZ Speed Comp: After it is activated, the Pan/Tilt moving speed will
vary from the zoom position
Initial Position: Set the camera lens to return to the last operated
position or the first default position after POWER ON
<Remark> First default position = Preset 0
Motionless Preset: When the function is enabled, the screen will
Freeze when Preset is executed. Freeze will be released after Preset is
completed
D-Zoom Limit: Set the D-zoom limit
PTZ Motion Sync: When activated, PTZ synchronization can be
achieved by controlling with the Presets
<Remark> Refer to the Preset speed setting for this feature. The speed may
be adjusted automatically due to the difference of PTZ moving range.
Picture Effect: Set picture effect, Off/Neg/Black and White
Image Mode: The user may customize his/her desired image mode
Image Mode Load: Adjustable when the Image mode is set to Custom.
After selected, the corresponding Image mode parameters will be read
and applied to Custom
2D noise reduction: 2D noise reduction settings
3D noise reduction: 3D noise reduction settings
Gamma: Gamma Level adjustment (Adjustable when the image mode
is set to Custom)
Brightness: Brightness adjustment of the image (Adjustable when the
image mode is set to Custom)
Hue: Hue adjustment of the image (Adjustable when the image mode is
set to Custom)
Saturation: Saturation adjustment of the image (Adjustable when the
image mode is set to Custom)
Sharpness: Adjust the sharpness of the image
To Next Page
Loading...
Need help?
General
