Lumens VC-A71SN

32
3
3D NR
3D noise reduction settings
4
Image mode
The user may customize his/ her desired image mode
5
Image Mode Load
When no custom setting is needed, reset the picture parameters back to the
factory default by selecting this item
6
Gamma
Gamma Level adjustment; Adjustable when the image mode is set to Custom
7
Brightness
Brightness adjustment of the image; Adjustable when the image mode is set
to Custom
8
Hue
Hue adjustment; Adjustable when the image mode is set to Custom
9
Saturation
Saturation adjustment of the image; Adjustable when the image mode is set
to Custom
10
Sharpness
Adjust the sharpness of the image
5.2.8 Setting - Audio
No
Item
Function Descriptions
NDI
ON
NDI
OFF
1
Audio Enable
Turn on/ off sound
V
V
2
Audio in Type
Set MIC In/ Line In
V
V
3
Audio Volume
Adjust Audio Volume
V
V
4
Audio Delay
Turn on/ off audio delay
V
5
Audio Delay Time(-)
Set the audio signal delay time (-1 ~ -500 ms)
V
6
Encode Type
AAC / G.711
V
7
Encode Sample Rate
Set Encode sample rate
 48 KHz (AAC)
 44.1 KHz (AAC)
 16 KHz (AAC)
 16 KHz (G.711)
 8 KHz (G.711)
V
1
2
3
4
5
6
4
7