Lumens VC-A71SN User Manual

34
4
MPEG-TS Setting
Set MPEG-TS format
<Remark> The port setting range 1025 ~ 65535
<Remark> The following port is used by the camera. Setting
of the port may not connect correctly
1935, 8080, 8554, 8556, 8557, 9090
V
5
SRT Setting
1. Set the field of SRT and then check the item to open SRT
streaming
After the SRT streaming is opened, it will be connected
automatically upon startup
2. The port setting range 1025 ~ 65535
<Remark> The following port is used by the camera. Setting
of the port may not connect correctly
1935,8554,8555,8556,8557
3. Delay time is for 20 to 8000 microseconds. The default
value is 120 microseconds
V
6
SNTP/ Port Setting
1. Set SNTP Server IP
2. Set HTTP port. The default Port value is 80
Set HTTPS port. The default Port value is 81
<Remark> Change of setting is available only when DHCP
function of camera is closed
V
V
7
Tracking Data Output
(FreeD)
When enabled, PTZ position information can be reported when
the camera moves
1. Serial Output: Please set the protocol to VISCA and the
baud rate to 38400
2. IP output: Set the IP address and port
3. The port numbers should be > 1024. 1935, 8555, 8556,
8557 cannot be used
<Remark> When Tracking Data Output is enabled, the camera
performance may be affected.
V
V
5.2.10 Setting - Time
No
Item
Function Descriptions
1
Time in Camera
Display the date and time of the camera
2
Set Time
 Manual Configuration: Set time manually
 Synchronize with computer time: Set the camera time according to the
computer time
 Synchronize with SNTP server: Set the camera time synchronously with
the SNTP server
<Remark> SNTP server address: Please change in network setting
1
2

Lumens VC-A71SN Specifications

General

Brand	Lumens
Model	VC-A71SN
Category	Security Camera
Language	English