Sivoia® QS roller 64TM Dual Mount Installation instructions
Page 2
Sivoia® QS
|
roller 64TM dual mount
Installation Instructions (continued)
Warning: Incorrect installation can lead to severe injury, follow all installation instructions.
Notes:
• The Sivoia QS roller 64 must be used only with window treatments approved by Lutron®.
• There must be a clearance of at least 1.3 feet (0.4 meters) between the fully lowered system
and any permanent object.
• Installation shall be executed by a qualified electrician according to national wiring rules.
•
Codes: Install in accordance with all local and national electrical codes.
•
Environment: Ambient operating temperature: 32 to 104 °F (0 to 40 °C), 0 to 90%humidity,
non-condensing. Indoor use only.
To Next Page
Loading...
