Sivoia® QS
|
roller 64TM dual mount
Installation Instructions (please leave for occupant)
Tools Required:
Tape Measure 1/4 in. Hex-Head Driver
Wire Cutter/Stripper Level
Pliers Power Drill
#2 Phillips Screwdriver
(2) Sivoia QS roller 64 units
Left and right dual brackets
(10) Mounting screws
(#8x1.75 in. (#8x44 mm) hex head screws)
(2)
4-pin terminal blocks
(Actual size)
(1) Programming stylus (1) Screwdriver
(4) 4 in. (102 mm) Cable ties
Box Contents:
(4) Cable tie anchors
Sivoia® QS roller 64TM Dual Mount Installation instructions
Page 1
To Next Page
Loading...
