~
CARE AND MAINTENANCE
CLEANING
The durable finish of the knobs and heavy aluminum
front panel will last indefinitely with proper care and
cleaning. Never use scouring pads, steel wool, scour-
ing powders, or harsh chemical agents, such as lye
solution. These will mar the finish. Clean with a soft,
lint-free cloth or cotton swab slightly dampened with a
mild solution of detergent and water.
REPACKING FOR SHIPMENT
Should it become necessary to ship your C-03 for any
reason, use the original packing materials. If these are
no longer available, be sure that adequate materials,
at least equivalent to the original, are used.
REPAIRS
Only the most competent and qualified service techni-
cians should be allowed to service the C-03. The
Luxman company and its factory-trained warranty
station personnel have the knowledge and special
equipment needed for repair and calibration of this
precision instrument.
In the event of difficulty, call the Luxman Authorized
Service Station nearest your home or business. In
many cases, the dealer where you purchased your
Luxman unit will be equipped to provide service.
, SPECIFICATIONS
Total Harmonic Distortion:
CD-Preout, 2V 0.004%
Phono . MM - Rec out, 5V 0.005%
Phono . MC (100Q) - Rec out, 5V . . . . . . .. 0.Q1%
Frequency Response:
Phono (MM) 20 Hz - 20 kHz
±
0.3 dB
Line. . . . . . . . . .. 10Hz - 100 kHz +0.3, -0.8 dB
Signal to Noise Ratio (lHF-A):
MM 85 dB
MC 68 dB
Line 110 dB
Maximum Output Level/Impedance 1OV/20Q
Input Sensitivity/Impedance:
MM. . . . . . . . . . . . . . . . . . . . . . . . . .. 2.5mV /50kQ
Line 150mV /47kQ
Phono Overload Input at 1 kHz. . . . . . . . . . .. 220mV
Dimension . . . . . . . . .. 438(W) x 88(H) x 328(D) mm
Weight (Net) 5.5 kg
Specifications and appearance design subject to
change without notice .
•••••••••••••••••••••••••••••••• 12 ••••••••••••••••••••••••••••••••
To Next Page
Loading...
Need help?
General
