If you encounter a problem, please review the items in
the following check list. Also, be sure to thoroughly
check other connected components, such as speak-
ers, pre-arnplifier. turntable, CD player, tuner, cassette
deck, equalizer, etc.
PROBLEM
PROBABLE CAUSE AND SOLUTION
Power Does Not Come On • Check line cord to ensure good connection at AC outlet.
No Sound • Incorrect Input connected. Check input leads on back panel.
• Input lead wires are loose. Connect firmly.
• Attenuators are set to minimum position. Rotate them clock-
wise.
• Incorrect SPEAKER switch setting or rear panel SPEAKER LEAD
connections. (Check for shorted speaker leads.)
Distorted Sound
• Speaker Impedance too low (less than 3 ohms).
Shuts off at High Volume levels
Check speaker specifications.
• Two speaker systems of less than 6 ohms each are in use.
Select only one system at a time when playing at high volume
levels.
, SPECIFICATIONS
Power Output 200W x 2 (FTC, 8Q, 0.03%)
Input Sensitivity/lmpedance 1V/45kQ
BTL Power. . . . . .. . . . . . .. . . . . . . . .. . .. 480W (8Q, 1 kHz)
Rated I.M No more than 0.02%
Frequency Response 10Hz - 100 kHz
Dimensions 438(W) x 166(H) x 420(D) mm
Signal to Noise Ratio. . . . . . . .. . . . . .. . . . . . . . . . .. 120 dB
Weight (Net) 23.6 Kg
T.H.D 0.02%
Design and specifications are subject to change with-
out notice .
••••••••••••••••••••••••••••••• 12 •••••••••••••••••••••••••••••••
To Next Page
Loading...
Need help?
General
