35
OPERATORS MANUAL
Carburettor adjustment
The carburettor is provided by variable venture type with floats.
When adjusting the carburettor the engine must be at the right
using temperature.
Models which have two carburettors each carburettor has been
calibrated for both cylinders. To achieve both maximum capacity
and good fuel economy jets and adjusting must be correct. If
there is a problem with identification or adjustment of carburettors
contact the nearest LYNX-service.
Fuel filter
Gas wire, loosening
Fuel pump
Idling screw
Air screw
Carburetor Choke wire
Adjusting
screw
To Next Page
Loading...
Need help?
General
