64
OPERATORS MANUAL
1234567
Starting rope condition x x x
Cylinder head screws - cylinder screws x x
Engine mount nuts x x x
Exhaust system x x x
Cleaning of RAVE-valves x x x
Cooling system condition (coolant level/fan belt) A xxxx
Cooling hoses and connections x x
Coolant replacement x
Condition of seals x
Injection oil filter condition (replaced every year) x x x x
Oil injection pump adjustment, wire condition x x x x
Cleaning of fuel filter x x x
Fuel filter replacement x x x x
Fuel lines and connections x x
Carburetor adjustment (control of syncronising) x x x
Carburetor cleaning x
Inspection of throttle cable x x
Inspection of rubber flanges x x
Air filter cleaning B xxx x
Drive belt condition C xxxx x
Condition of drive and driven pulleys x x
Adjustment of driven pulley x x x
Cleaning of drive pulley x x x x
Tightening of pulley´s fastening bolts x x x x
Driven pulley preload x x x
Lubrication of driven pulley axle with anti-seize lubricant x x x x
Brake fluid (replacement once a year) x x x x x
Brake condition (brake pads, hose and brake disc) x x x x x
Drive chain tension x x x x
Chaincase/gearbox oil level D xx
Chaincase/gearbox oil change (replacement once a year) x x x
Lubrication of drive axle bearing x x x
Steering bolts inspection, retorque 26 Nm x x x
Steering and front suspension mechanism x x x
LTS-front suspension:change of steering arms
(compulsory 6000km)
x
LTS-front suspension: lubrication E xxxx
Wear and condition of skis and runners x x
Steering and ski leg camber adjustment x x x x
ENGINE AND
COOLING-
SYSTEM
OIL-
INJECTION
FUEL
SYSTEM
CARBU-
RETOR
TRANS-
MISSION
BRAKE
SYSTEM
CHAINCASE
STEERING