11. At this point, you will see a message detailing the remaining steps for the
installation. Read these steps, then press “OK.”
12. When the installation is complete, click “Close” to complete the wizard.
13. Once the installer is finished, shut down your computer. Plug the FireWire 1814
into your computer’s FireWire Port, then press the power button to switch the unit
on. Once the FireWire 1814 is connected, turn the computer back on.
14. Once the operating system has loaded, go to "System Preferences" in the Apple
Menu. Select the "Sound" preference panel, and click the "Output" tab. Select
"M-Audio FireWire 1814" to choose the FireWire 1814 as your default
output device.
To Next Page
Loading...
