M-Audio FireWire 1814

Mac OS9
Never connect or disconnect the FireWire 1814 while your computer is on. Also, if you
are going to use bus power, we recommend that you connect the FireWire cable before
turning on the FireWire 1814’s power button.
To use MIDI on the FireWire 1814, you must first install Opcode’s OMS before installing
the FireWire 1814 driver software. OMS can be installed from the Driver CD by opening
the OMS 2.3.8 folder, and then double clicking the OMS installation icon. After you have
installed OMS, follow these instructions to install the FireWire 1814 driver software.
1. Insert the Driver CD-ROM into your CD-ROM drive and open the CD-ROM to view its
contents. Locate and open the “FireWire 1814” folder, then open the folder for OS 9.
2. Double click on the M-Audio FireWire 1814 Installer icon.
3. Click “Continue” in the Firewire 1814 splash screen.