SECTION 2 SAFETY
Form 169000 / 169040 15 Revision D
Use only service and repair parts made
or approved by the equipment
manufacturer. Substituted parts may not
meet strength, design, or safety
requirements.
Do not
modify the machine. Unauthorized
modifications may impair the function
and/or safety and affect machine life.
Stop engine, and remove key from
ignition before leaving Operator's seat
for any reason. A child or even a pet
could engage an idling machine.
Keep the area used for servicing
machinery clean and dry. Wet or oily
floors are slippery. Wet spots can be
dangerous when working with electrical
equipment. Be sure all electrical outlets
and tools are properly grounded.
Use adequate light for the job at hand.
Keep machinery clean. Do not
allow oil or
grease to accumulate on service
platforms, ladders or controls. Clean
machines before storage.
Never use gasoline, naphtha or any
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.
To Next Page
Loading...
