MacDon M150 - Page 72

WINDROWER OPERATION
Form 169017 / 169087 / 169095 70 Revision C
j. Attach header transport hitch to header as follows:
1. Position end (A) of the aft section onto front
wheel hook (B).
2. Push down until latch (C) captures the end
(A).
3. Secure latch (C) with clevis pin (D).
4. Remove the L-pin from end (E) of aft section if
installed.
5. Position end (F) of the forward section into
end (E) of the aft section.
6. Lower forward section into aft section.
7. Fully insert L-pin (G) in upper hole, and turn
pin to lock it. Secure with ring pin (H)
(continued next page)
G
H
E
F
E
F
A
C
D
B
AFT SECTION
FORWARD SECTION
A