PRE-DELIVERY CHECKS
Form 169018 48 Revision C
VII. EXTERIOR LIGHTS
a. Ensure operator’s seat is locked in cab-forward
mode.
b. Switch on FIELD lights, and check that all lights
are functioning as shown below.
c. Switch on ROAD lights, and check that all lights
are functioning as shown below.
d. Activate HIGH/LOW switch, and check lights.
e. Activate turn signals and hazard warning lights
with switches on CDM, and check lights.
f. Turn off lights.
(continued next page)
REAR - CAB FWD
FIELD LIGHTS
SWATH LIGHTS - HIGH / LOW
FRONT - CAB FWD
FIELD LIGHTS
HIGH / LOW
REAR - CAB FWD
TURN SIGNALS / HAZARDS - AMBER
TAIL LIGHTS - RED
(If Installed)
FRONT - CAB FWD
HIGH / LOW
LIGHTS - ROAD
TURN SIGNALS / HAZARDS - AMBER
To Next Page
Loading...
