MacroAir Technologies AirVolution-D 370 User Manual

© 2018 MacroAir Technologies Toll Free: 866 668 3247 Fax: 909 890 2313 www.macroairfans.com 12
Rev. Date 040218
Fan Components and Tools
Tools Required:
For All Mounts:
-Torque Wrench
-Level
-Phillips Screwdriver
-3/8’’ Wrench
-9/16 Wrench
-5/16’’ Socket
-9/16’’ Socket
For Rapid Mount Commercial:
-Needle Nose Pliers
-Cordless Drill For Glulam Mounting
-1/4” Socket For Direct Glulam Mounting
-3/16’’ Hex Bit Socket For Unistrut Mounting
-3/4’’ Wrench For I-Beam & Glulam Brackets
-3/4’’ Socket For I-Beam & Glulam Brackets
-1/8’’ Allen Wrench (Provided)
-5/32’’ Allen Wrench (Provided)
For I-Beam & Glulam Brackets
For Fixed Angle Mount:
-Cordless Drill For Glulam Mounting Only
-1/2” Wrench
-3/4’’ Wrench
-3/4’’ Socket
-7/32” Allen Wrench (Provided)

MacroAir Technologies AirVolution-D 370 Specifications

General

Brand	MacroAir Technologies
Model	AirVolution-D 370
Category	Fan
Language	English