© 2017 MacroAir Technologies Toll Free: 866 668 3247 Fax: 909 890 2313 www.macroairfans.com 20
Rev. Date 032217
Address
The address page allows you to change the Modbus address of the fan. This is useful for
programming fans for the controller that were not originally shipped with the controller. Please
note that each fan must have a unique address, so be careful when making any changes to ensure
that there are no address conflicts. Only one fan can be connected when changing address.
Up/Down Arrows: Adjusts the address number shown on the screen. Ensure that this number is
unique for every connected fan
Reset Drive: Resets the AirBrain. Address changes do not take effect until the drive is reset
Left arrow: Takes you to Fan Settings
Right Arrow: Takes you to Mkey
To Next Page
Loading...
Need help?
General