© 2017 MacroAir Technologies Toll Free: 866 668 3247 Fax: 909 890 2313 www.macroairfans.com 22
Rev. Date 032217
Fan Diameter
The Fan diameter page allows you to set the diameter on 550, 780, and AVD3-450 fans. These
fans will not run properly if the diameter is not set correctly. This screen is reached by pressing
the “Blade” section of the Fan Settings Screen.
Up/Down Arrow: Adjust the diameter up and down. For AVD3-450 fans, adjust the diameter past
24 to access 3-blade fan settings
Left Arrow: Takes you to the Home Screen
Right Arrow: Takes you to the Startup Sequence page
To Next Page
Loading...
Need help?
General