Why is the audio quality poor after connection with a Bluetooth-enabled device on my Macrom M-DVD5562R Receiver?
If the audio quality is poor after connecting a Bluetooth-enabled device to your Macrom Receiver, move the device closer to the system or remove any obstacle between the device and the system, as the Bluetooth reception may be poor.
Why can't I connect to my Macrom Receiver?
If you cannot connect to your Macrom Receiver, refer to the user manual of the device for how to enable the Bluetooth function if it is not enabled. Disconnect that device or all other connected devices and then try again if the system is already connected with another Bluetooth-enabled device.
General| Tuner | Yes |
|---|---|
| DVD player | Yes |
| Tuner Type | AM/FM |
| Type | Receiver |
| Supported Disc Formats | DVD, CD, MP3, WMA |
| Video Output | Composite, S-Video |
Details the front panel controls, buttons, and input/output ports.
Instructions for tuning radio stations and saving presets.
Steps to pair your Bluetooth-enabled phone with the unit.
How to make, receive, and manage phone calls via Bluetooth.
Configuring Bluetooth, auto-connect, auto-answer, and microphone.
Selecting iPod as a source and operating playback functions.
Controlling volume, muting sound, and selecting preset equalizers.
Managing Bluetooth, auto-connect, auto-answer, and microphone settings.
Steps for removing old systems and installing the main unit.
Technical details for power, FM, AM, LCD, and DVD player.
Solutions for no power, no sound, and remote control response problems.
Troubleshooting disc errors, no image, and distorted video.
Fixes for blown fuses, USB errors, and Bluetooth connection problems.
To Next Page
